| Title: | Bayesian Dynamic Factor Analysis (DFA) with 'Stan' |
|---|---|
| Description: | Implements Bayesian dynamic factor analysis with 'Stan'. Dynamic factor analysis is a dimension reduction tool for multivariate time series. 'bayesdfa' extends conventional dynamic factor models in several ways. First, extreme events may be estimated in the latent trend by modeling process error with a student-t distribution. Second, alternative constraints (including proportions are allowed). Third, the estimated dynamic factors can be analyzed with hidden Markov models to evaluate support for latent regimes. |
| Authors: | Eric J. Ward [aut, cre], Sean C. Anderson [aut], Luis A. Damiano [aut], Michael J. Malick [aut], Philina A. English [aut], Mary E. Hunsicker, [ctb], Mike A. Litzow [ctb], Mark D. Scheuerell [ctb], Elizabeth E. Holmes [ctb], Nick Tolimieri [ctb], Trustees of Columbia University [cph] |
| Maintainer: | Eric J. Ward <[email protected]> |
| License: | GPL (>=3) |
| Version: | 1.3.3 |
| Built: | 2024-11-25 17:33:16 UTC |
| Source: | https://github.com/fate-ewi/bayesdfa |
A DESCRIPTION OF THE PACKAGE
Stan Development Team (2020). RStan: the R interface to Stan. R package version 2.21.2. https://mc-stan.org
Apply cross validation to DFA model
dfa_cv( stanfit, cv_method = c("loocv", "lfocv"), fold_ids = NULL, n_folds = 10, estimation = c("sampling", "optimizing", "vb"), iter = 2000, chains = 4, thin = 1, ... )dfa_cv( stanfit, cv_method = c("loocv", "lfocv"), fold_ids = NULL, n_folds = 10, estimation = c("sampling", "optimizing", "vb"), iter = 2000, chains = 4, thin = 1, ... )
stanfit |
A stanfit object, to preserve the model structure from a call to fit_dfa() |
cv_method |
The method used for cross validation. The options are 'loocv', where time is ignored and each data point is assigned randomly to a fold. The method 'ltocv' is leave time out cross validation, and time slices are iteratively held out out. Finally the method 'lfocv' implements leave future out cross validation to do one-step ahead predictions. |
fold_ids |
A vector whose length is the same as the number of total data points. Elements are the fold id of each data point. If not all data points are used (e.g. the lfocv or ltocv approach might only use 10 time steps) the value can be something other than a numbber, e.g. NA |
n_folds |
Number of folds, defaults to 10 |
estimation |
Character string. Should the model be sampled using |
iter |
Number of iterations in Stan sampling, defaults to 2000. |
chains |
Number of chains in Stan sampling, defaults to 4. |
thin |
Thinning rate in Stan sampling, defaults to 1. |
... |
Any other arguments to pass to |
## Not run: set.seed(42) s <- sim_dfa(num_trends = 1, num_years = 20, num_ts = 3) obs <- c(s$y_sim[1, ], s$y_sim[2, ], s$y_sim[3, ]) long <- data.frame("obs" = obs, "ts" = sort(rep(1:3, 20)), "time" = rep(1:20, 3)) m <- fit_dfa(y = long, data_shape = "long", estimation="none") # random folds fit_cv <- dfa_cv(m, cv_method = "loocv", n_folds = 5, iter = 50, chains = 1, estimation="sampling") # folds can also be passed in fold_ids <- sample(1:5, size = nrow(long), replace = TRUE) m <- fit_dfa(y = long, data_shape = "long", estimation="none") fit_cv <- dfa_cv(m, cv_method = "loocv", n_folds = 5, iter = 50, chains = 1, fold_ids = fold_ids, estimation="sampling") # do an example of leave-time-out cross validation where years are dropped fold_ids <- long$time m <- fit_dfa(y = long, data_shape = "long", estimation="none") fit_cv <- dfa_cv(m, cv_method = "loocv", iter = 100, chains = 1, fold_ids = fold_ids) # example with covariates and long format data obs_covar <- expand.grid("time" = 1:20, "timeseries" = 1:3, "covariate" = 1:2) obs_covar$value <- rnorm(nrow(obs_covar), 0, 0.1) obs <- c(s$y_sim[1, ], s$y_sim[2, ], s$y_sim[3, ]) m <- fit_dfa(y = long, obs_covar = obs_covar, data_shape = "long", estimation="none") fit_cv <- dfa_cv(m, cv_method = "loocv", n_folds = 5, iter = 50, chains = 1, estimation="sampling") ## End(Not run)## Not run: set.seed(42) s <- sim_dfa(num_trends = 1, num_years = 20, num_ts = 3) obs <- c(s$y_sim[1, ], s$y_sim[2, ], s$y_sim[3, ]) long <- data.frame("obs" = obs, "ts" = sort(rep(1:3, 20)), "time" = rep(1:20, 3)) m <- fit_dfa(y = long, data_shape = "long", estimation="none") # random folds fit_cv <- dfa_cv(m, cv_method = "loocv", n_folds = 5, iter = 50, chains = 1, estimation="sampling") # folds can also be passed in fold_ids <- sample(1:5, size = nrow(long), replace = TRUE) m <- fit_dfa(y = long, data_shape = "long", estimation="none") fit_cv <- dfa_cv(m, cv_method = "loocv", n_folds = 5, iter = 50, chains = 1, fold_ids = fold_ids, estimation="sampling") # do an example of leave-time-out cross validation where years are dropped fold_ids <- long$time m <- fit_dfa(y = long, data_shape = "long", estimation="none") fit_cv <- dfa_cv(m, cv_method = "loocv", iter = 100, chains = 1, fold_ids = fold_ids) # example with covariates and long format data obs_covar <- expand.grid("time" = 1:20, "timeseries" = 1:3, "covariate" = 1:2) obs_covar$value <- rnorm(nrow(obs_covar), 0, 0.1) obs <- c(s$y_sim[1, ], s$y_sim[2, ], s$y_sim[3, ]) m <- fit_dfa(y = long, obs_covar = obs_covar, data_shape = "long", estimation="none") fit_cv <- dfa_cv(m, cv_method = "loocv", n_folds = 5, iter = 50, chains = 1, estimation="sampling") ## End(Not run)
Get the fitted values from a DFA as a data frame
dfa_fitted(modelfit, conf_level = 0.95, names = NULL)dfa_fitted(modelfit, conf_level = 0.95, names = NULL)
modelfit |
Output from |
conf_level |
Probability level for CI. |
names |
Optional vector of names for time series labels. Should be same length as the number of time series. |
A data frame with the following columns: ID is an identifier for each time series, time is the time step, y is the observed values standardized to mean 0 and unit variance, estimate is the mean fitted value, lower is the lower CI, and upper is the upper CI.
predicted plot_fitted fit_dfa
y <- sim_dfa(num_trends = 2, num_years = 20, num_ts = 4) m <- fit_dfa(y = y$y_sim, num_trends = 2, iter = 50, chains = 1) fitted <- dfa_fitted(m)y <- sim_dfa(num_trends = 2, num_years = 20, num_ts = 4) m <- fit_dfa(y = y$y_sim, num_trends = 2, iter = 50, chains = 1) fitted <- dfa_fitted(m)
Get the loadings from a DFA as a data frame
dfa_loadings(rotated_modelfit, names = NULL, summary = TRUE, conf_level = 0.95)dfa_loadings(rotated_modelfit, names = NULL, summary = TRUE, conf_level = 0.95)
rotated_modelfit |
Output from |
names |
An optional vector of names for plotting the loadings. |
summary |
Logical. Should the full posterior densities be returned? Defaults to |
conf_level |
Confidence level for credible intervals. Defaults to 0.95. |
A data frame with the following columns:
name is an identifier for each loading, trend is the trend for the
loading, median is the posterior median loading, lower is the lower CI,
upper is the upper CI, and prob_diff0 is the probability the loading is
different than 0. When summary = FALSE, there is no lower or upper
columns and instead there are columns chain and draw.
plot_loadings fit_dfa rotate_trends
set.seed(42) s <- sim_dfa(num_trends = 2, num_ts = 4, num_years = 10) # only 1 chain and 180 iterations used so example runs quickly: m <- fit_dfa(y = s$y_sim, num_trends = 2, iter = 50, chains = 1) r <- rotate_trends(m) loadings <- dfa_loadings(r, summary = TRUE) loadings <- dfa_loadings(r, summary = FALSE)set.seed(42) s <- sim_dfa(num_trends = 2, num_ts = 4, num_years = 10) # only 1 chain and 180 iterations used so example runs quickly: m <- fit_dfa(y = s$y_sim, num_trends = 2, iter = 50, chains = 1) r <- rotate_trends(m) loadings <- dfa_loadings(r, summary = TRUE) loadings <- dfa_loadings(r, summary = FALSE)
Get the trends from a DFA as a data frame
dfa_trends(rotated_modelfit, years = NULL)dfa_trends(rotated_modelfit, years = NULL)
rotated_modelfit |
Output from |
years |
Optional numeric vector of years. |
A data frame with the following columns: time is the time step, trend_number is an identifier for each trend, estimate is the trend mean, lower is the lower CI, and upper is the upper CI.
plot_trends fit_dfa rotate_trends
set.seed(1) s <- sim_dfa(num_trends = 1) m <- fit_dfa(y = s$y_sim, num_trends = 1, iter = 50, chains = 1) r <- rotate_trends(m) trends <- dfa_trends(r)set.seed(1) s <- sim_dfa(num_trends = 1) m <- fit_dfa(y = s$y_sim, num_trends = 1, iter = 50, chains = 1) r <- rotate_trends(m) trends <- dfa_trends(r)
Fit a DFA with different number of trends and return the leave one out (LOO) value as calculated by the loo package.
find_dfa_trends( y = y, kmin = 1, kmax = 5, iter = 2000, thin = 1, compare_normal = FALSE, convergence_threshold = 1.05, variance = c("equal", "unequal"), ... )find_dfa_trends( y = y, kmin = 1, kmax = 5, iter = 2000, thin = 1, compare_normal = FALSE, convergence_threshold = 1.05, variance = c("equal", "unequal"), ... )
y |
A matrix of data to fit. Columns represent time element. |
kmin |
Minimum number of trends, defaults to 1. |
kmax |
Maximum number of trends, defaults to 5. |
iter |
Iterations when sampling from each Stan model, defaults to 2000. |
thin |
Thinning rate when sampling from each Stan model, defaults to 1. |
compare_normal |
If |
convergence_threshold |
The maximum allowed value of Rhat to determine convergence of parameters |
variance |
Vector of variance arguments for searching over large groups of models. Can be either or both of ("equal","unequal") |
... |
Other arguments to pass to |
set.seed(42) s <- sim_dfa(num_trends = 2, num_years = 20, num_ts = 3) # only 1 chain and 180 iterations used so example runs quickly: m <- find_dfa_trends( y = s$y_sim, iter = 50, kmin = 1, kmax = 2, chains = 1, compare_normal = FALSE, variance = "equal", convergence_threshold = 1.1, control = list(adapt_delta = 0.95, max_treedepth = 20) ) m$summary m$best_modelset.seed(42) s <- sim_dfa(num_trends = 2, num_years = 20, num_ts = 3) # only 1 chain and 180 iterations used so example runs quickly: m <- find_dfa_trends( y = s$y_sim, iter = 50, kmin = 1, kmax = 2, chains = 1, compare_normal = FALSE, variance = "equal", convergence_threshold = 1.1, control = list(adapt_delta = 0.95, max_treedepth = 20) ) m$summary m$best_model
Find which chains to invert by checking the sum of the squared deviations between the first chain and each other chain.
find_inverted_chains(model, trend = 1, plot = FALSE)find_inverted_chains(model, trend = 1, plot = FALSE)
model |
A Stan model, |
trend |
Which trend to check |
plot |
Logical: should a plot of the trend for each chain be made?
Defaults to |
invert_chains
set.seed(2) s <- sim_dfa(num_trends = 2) set.seed(1) m <- fit_dfa(y = s$y_sim, num_trends = 1, iter = 30, chains = 2) # chains were already inverted, but we can redo that, as an example, with: find_inverted_chains(m$model, plot = TRUE)set.seed(2) s <- sim_dfa(num_trends = 2) set.seed(1) m <- fit_dfa(y = s$y_sim, num_trends = 1, iter = 30, chains = 2) # chains were already inverted, but we can redo that, as an example, with: find_inverted_chains(m$model, plot = TRUE)
Fit multiple models with differing numbers of regimes to trend data
find_regimes( y, sds = NULL, min_regimes = 1, max_regimes = 3, iter = 2000, thin = 1, chains = 1, ... )find_regimes( y, sds = NULL, min_regimes = 1, max_regimes = 3, iter = 2000, thin = 1, chains = 1, ... )
y |
Data, time series or trend from fitted DFA model. |
sds |
Optional time series of standard deviations of estimates. If passed in, residual variance not estimated. |
min_regimes |
Smallest of regimes to evaluate, defaults to 1. |
max_regimes |
Biggest of regimes to evaluate, defaults to 3. |
iter |
MCMC iterations, defaults to 2000. |
thin |
MCMC thinning rate, defaults to 1. |
chains |
MCMC chains; defaults to 1 (note that running multiple chains may result in a "label switching" problem where the regimes are identified with different IDs across chains). |
... |
Other parameters to pass to |
data(Nile) find_regimes(log(Nile), iter = 50, chains = 1, max_regimes = 2)data(Nile) find_regimes(log(Nile), iter = 50, chains = 1, max_regimes = 2)
Find outlying "black swan" jumps in trends
find_swans(rotated_modelfit, threshold = 0.01, plot = FALSE)find_swans(rotated_modelfit, threshold = 0.01, plot = FALSE)
rotated_modelfit |
Output from |
threshold |
A probability threshold below which to flag trend events as extreme |
plot |
Logical: should a plot be made? |
Prints a ggplot2 plot if plot = TRUE; returns a data frame indicating the
probability that any given point in time represents a "black swan" event
invisibly.
Anderson, S.C., Branch, T.A., Cooper, A.B., and Dulvy, N.K. 2017. Black-swan events in animal populations. Proceedings of the National Academy of Sciences 114(12): 3252–3257. https://doi.org/10.1073/pnas.1611525114
set.seed(1) s <- sim_dfa(num_trends = 1, num_ts = 3, num_years = 30) s$y_sim[1, 15] <- s$y_sim[1, 15] - 6 plot(s$y_sim[1, ], type = "o") abline(v = 15, col = "red") # only 1 chain and 250 iterations used so example runs quickly: m <- fit_dfa(y = s$y_sim, num_trends = 1, iter = 50, chains = 1, nu_fixed = 2) r <- rotate_trends(m) p <- plot_trends(r) #+ geom_vline(xintercept = 15, colour = "red") print(p) # a 1 in 1000 probability if was from a normal distribution: find_swans(r, plot = TRUE, threshold = 0.001)set.seed(1) s <- sim_dfa(num_trends = 1, num_ts = 3, num_years = 30) s$y_sim[1, 15] <- s$y_sim[1, 15] - 6 plot(s$y_sim[1, ], type = "o") abline(v = 15, col = "red") # only 1 chain and 250 iterations used so example runs quickly: m <- fit_dfa(y = s$y_sim, num_trends = 1, iter = 50, chains = 1, nu_fixed = 2) r <- rotate_trends(m) p <- plot_trends(r) #+ geom_vline(xintercept = 15, colour = "red") print(p) # a 1 in 1000 probability if was from a normal distribution: find_swans(r, plot = TRUE, threshold = 0.001)
Fit a Bayesian DFA
fit_dfa( y = y, num_trends = 1, varIndx = NULL, scale = c("zscore", "center", "none"), iter = 2000, chains = 4, thin = 1, control = list(adapt_delta = 0.99, max_treedepth = 20), nu_fixed = 101, est_correlation = FALSE, estimate_nu = FALSE, estimate_trend_ar = FALSE, estimate_trend_ma = FALSE, estimate_process_sigma = FALSE, equal_process_sigma = TRUE, estimation = c("sampling", "optimizing", "vb", "none"), data_shape = c("wide", "long"), obs_covar = NULL, pro_covar = NULL, offset = NULL, z_bound = NULL, z_model = c("dfa", "proportion"), trend_model = c("rw", "bs", "ps", "gp"), n_knots = NULL, knot_locs = NULL, par_list = NULL, family = "gaussian", verbose = FALSE, inv_var_weights = NULL, likelihood_weights = NULL, gp_theta_prior = c(3, 1), expansion_prior = FALSE, ... )fit_dfa( y = y, num_trends = 1, varIndx = NULL, scale = c("zscore", "center", "none"), iter = 2000, chains = 4, thin = 1, control = list(adapt_delta = 0.99, max_treedepth = 20), nu_fixed = 101, est_correlation = FALSE, estimate_nu = FALSE, estimate_trend_ar = FALSE, estimate_trend_ma = FALSE, estimate_process_sigma = FALSE, equal_process_sigma = TRUE, estimation = c("sampling", "optimizing", "vb", "none"), data_shape = c("wide", "long"), obs_covar = NULL, pro_covar = NULL, offset = NULL, z_bound = NULL, z_model = c("dfa", "proportion"), trend_model = c("rw", "bs", "ps", "gp"), n_knots = NULL, knot_locs = NULL, par_list = NULL, family = "gaussian", verbose = FALSE, inv_var_weights = NULL, likelihood_weights = NULL, gp_theta_prior = c(3, 1), expansion_prior = FALSE, ... )
y |
A matrix of data to fit. See |
num_trends |
Number of trends to fit. |
varIndx |
Indices indicating which timeseries should have shared variances. |
scale |
Character string, used to standardized data. Can be "zscore" to center and standardize data, "center" to just standardize data, or "none". Defaults to "zscore" |
iter |
Number of iterations in Stan sampling, defaults to 2000. Used for both
|
chains |
Number of chains in Stan sampling, defaults to 4. |
thin |
Thinning rate in Stan sampling, defaults to 1. |
control |
A list of options to pass to Stan sampling. Defaults to
|
nu_fixed |
Student t degrees of freedom parameter. If specified as
greater than 100, a normal random walk is used instead of a random walk
with a t-distribution. Defaults to |
est_correlation |
Boolean, whether to estimate correlation of
observation error matrix |
estimate_nu |
Logical. Estimate the student t degrees of freedom
parameter? Defaults to |
estimate_trend_ar |
Logical. Estimate AR(1) parameters on DFA trends? Defaults to 'FALSE“, in which case AR(1) parameters are set to 1 |
estimate_trend_ma |
Logical. Estimate MA(1) parameters on DFA trends? Defaults to 'FALSE“, in which case MA(1) parameters are set to 0. |
estimate_process_sigma |
Logical. Defaults FALSE, whether or not to estimate process error sigma. If not estimated, sigma is fixed at 1, like conventional DFAs. |
equal_process_sigma |
Logical. If process sigma is estimated, whether or not to estimate a single shared value across trends (default) or estimate equal values for each trend |
estimation |
Character string. Should the model be sampled using |
data_shape |
If |
obs_covar |
Optional dataframe of data with 4 named columns ("time","timeseries","covariate","value"), representing: (1) time, (2) the time series affected, (3) the covariate number for models with more than one covariate affecting each trend, and (4) the value of the covariate |
pro_covar |
Optional dataframe of data with 4 named columns ("time","trend","covariate","value"), representing: (1) time, (2) the trend affected, (3) the covariate number for models with more than one covariate affecting each trend, and (4) the value of the covariate |
offset |
a string argument representing the name of the offset variable to be included. The variable name is in the data frame passed in, e.g. "offset". This only works when the data shape is "long". All transformations (such as log transformed effort) to the offset must be done before passing in the data. |
z_bound |
Optional hard constraints for estimated factor loadings – really only applies to model with 1 trend. Passed in as a 2-element vector representing the lower and upper bound, e.g. (0, 100) to constrain positive |
z_model |
Optional argument allowing for elements of Z to be constrained to be proportions (each time series modeled as a mixture of trends). Arguments can be "dfa" (default) or "proportion" |
trend_model |
Optional argument to change the model of the underlying latent trend. By default this is set to 'rw', where the trend is modeled as a random walk - as in conentional DFA. Alternative options are 'bs', where B-splines are used to model the trends, "ps" where P-splines are used to model the trends, or 'gp', where gaussian predictive processes are used. If models other than 'rw' are used, there are some key points. First, the MA and AR parameters on these models will be turned off. Second, for B-splines and P-splines, the process_sigma becomes an optional scalar on the spline coefficients, and is turned off by default. Third, the number of knots can be specified (more knots = more wiggliness, and n_knots < N). For models with > 2 trends, each trend has their own spline coefficients estimated though the knot locations are assumed shared. If knots aren't specified, the default is N/3. By default both the B-spline and P-spline models use 3rd degree functions for smoothing, and include an intercept term. The P-spline model uses a difference penalty of 2. |
n_knots |
The number of knots for the B-spline, P-spline, or Gaussian predictive process models. Optional, defaults to round(N/3) |
knot_locs |
Locations of knots (optional), defaults to uniform spacing between 1 and N |
par_list |
A vector of parameter names of variables to be estimated by Stan. If NULL, this will default to c("x", "Z", "sigma", "log_lik", "psi","xstar") for most models – though if AR / MA, or Student-t models are used additional parameters will be monitored. If you want to use diagnostic tools in rstan, including moment_matching, you will need to pass in a larger list. Setting this argument to "all" will monitor all parameters, enabling the use of diagnostic functions – but making the models a lot larger for storage. Finally, this argument may be a custom string of parameters to monitor, e.g. c("x","sigma") |
family |
String describing the observation model. Default is "gaussian", but included options are "gamma", "lognormal", negative binomial ("nbinom2"), "poisson", or "binomial". The binomial family is assumed to have logit link, gaussian family is assumed to be identity, and the rest are log-link. |
verbose |
Whether to print iterations and information from Stan, defaults to FALSE. |
inv_var_weights |
Optional name of inverse variance weights argument in data frame. This is only implemented when data are in long format. If not entered, defaults to inv_var_weights = 1 for all observations. The implementation of inv_var_weights relies on inverse variance weightings, so that if you have standard errors associated with each observation, the inverse variance weights are calculated as inv_var_weights <- 1 / (standard_errors^2) . The observation error sigma in the likelihood then becomes sigma / sqrt(inv_var_weights) |
likelihood_weights |
Optional name of likelihood weights argument in data frame. These
are used in the same way weights are implemented in packages |
gp_theta_prior |
A 2-element vector controlling the prior on the Gaussian process parameter in cov_exp_quad. This prior is a half-Student t prior, with the first argument of gp_theta_prior being the degrees of freedom (nu), and the second element being the standard deviation |
expansion_prior |
Defaults to FALSE, if TRUE uses the parameter expansion prior of Ghosh & Dunson 2009 |
... |
Any other arguments to pass to |
Note that there is nothing restricting the loadings and trends from
being inverted (i.e. multiplied by -1) for a given chain. Therefore, if
you fit multiple chains, the package will attempt to determine which chains
need to be inverted using the function find_inverted_chains().
plot_loadings plot_trends rotate_trends find_swans
set.seed(42) s <- sim_dfa(num_trends = 1, num_years = 20, num_ts = 3) # only 1 chain and 250 iterations used so example runs quickly: m <- fit_dfa(y = s$y_sim, iter = 50, chains = 1) ## Not run: # example of observation error covariates set.seed(42) obs_covar <- expand.grid("time" = 1:20, "timeseries" = 1:3, "covariate" = 1) obs_covar$value <- rnorm(nrow(obs_covar), 0, 0.1) m <- fit_dfa(y = s$y_sim, iter = 50, chains = 1, obs_covar = obs_covar) # example of process error covariates pro_covar <- expand.grid("time" = 1:20, "trend" = 1:2, "covariate" = 1) pro_covar$value <- rnorm(nrow(pro_covar), 0, 0.1) m <- fit_dfa(y = s$y_sim, iter = 50, chains = 1, num_trends = 2, pro_covar = pro_covar) # example of long format data s <- sim_dfa(num_trends = 1, num_years = 20, num_ts = 3) obs <- c(s$y_sim[1, ], s$y_sim[2, ], s$y_sim[3, ]) long <- data.frame("obs" = obs, "ts" = sort(rep(1:3, 20)), "time" = rep(1:20, 3)) m <- fit_dfa(y = long, data_shape = "long", iter = 50, chains = 1) # example of long format data with obs covariates s <- sim_dfa(num_trends = 1, num_years = 20, num_ts = 3) obs <- c(s$y_sim[1, ], s$y_sim[2, ], s$y_sim[3, ]) long <- data.frame("obs" = obs, "ts" = sort(rep(1:3, 20)), "time" = rep(1:20, 3)) obs_covar <- expand.grid("time" = 1:20, "timeseries" = 1:3, "covariate" = 1:2) obs_covar$value <- rnorm(nrow(obs_covar), 0, 0.1) m <- fit_dfa(y = long, data_shape = "long", iter = 50, chains = 1, obs_covar = obs_covar) # example of model with Z constrained to be proportions and wide format data s <- sim_dfa(num_trends = 1, num_years = 20, num_ts = 3) m <- fit_dfa(y = s$y_sim, z_model = "proportion", iter = 50, chains = 1) # example of model with Z constrained to be proportions and long format data s <- sim_dfa(num_trends = 1, num_years = 20, num_ts = 3) obs <- c(s$y_sim[1, ], s$y_sim[2, ], s$y_sim[3, ]) long <- data.frame("obs" = obs, "ts" = sort(rep(1:3, 20)), "time" = rep(1:20, 3)) m <- fit_dfa(y = long, data_shape = "long", z_model = "proportion", iter = 50, chains = 1) #' # example of B-spline model with wide format data s <- sim_dfa(num_trends = 1, num_years = 20, num_ts = 3) m <- fit_dfa(y = s$y_sim, iter = 50, chains = 1, trend_model = "bs", n_knots = 10) #' #' # example of P-spline model with wide format data s <- sim_dfa(num_trends = 1, num_years = 20, num_ts = 3) m <- fit_dfa(y = s$y_sim, iter = 50, chains = 1, trend_model = "ps", n_knots = 10) # example of Gaussian process model with wide format data s <- sim_dfa(num_trends = 1, num_years = 20, num_ts = 3) m <- fit_dfa(y = s$y_sim, iter = 50, chains = 1, trend_model = "gp", n_knots = 5) # example of long format data s <- sim_dfa(num_trends = 1, num_years = 20, num_ts = 3) obs <- c(s$y_sim[1, ], s$y_sim[2, ], s$y_sim[3, ]) long <- data.frame("obs" = obs, "ts" = sort(rep(1:3, 20)), "time" = rep(1:20, 3), "offset" = rep(0.1,length(obs))) m <- fit_dfa(y = long, data_shape = "long", offset = "offset", iter = 50, chains = 1) ## End(Not run)set.seed(42) s <- sim_dfa(num_trends = 1, num_years = 20, num_ts = 3) # only 1 chain and 250 iterations used so example runs quickly: m <- fit_dfa(y = s$y_sim, iter = 50, chains = 1) ## Not run: # example of observation error covariates set.seed(42) obs_covar <- expand.grid("time" = 1:20, "timeseries" = 1:3, "covariate" = 1) obs_covar$value <- rnorm(nrow(obs_covar), 0, 0.1) m <- fit_dfa(y = s$y_sim, iter = 50, chains = 1, obs_covar = obs_covar) # example of process error covariates pro_covar <- expand.grid("time" = 1:20, "trend" = 1:2, "covariate" = 1) pro_covar$value <- rnorm(nrow(pro_covar), 0, 0.1) m <- fit_dfa(y = s$y_sim, iter = 50, chains = 1, num_trends = 2, pro_covar = pro_covar) # example of long format data s <- sim_dfa(num_trends = 1, num_years = 20, num_ts = 3) obs <- c(s$y_sim[1, ], s$y_sim[2, ], s$y_sim[3, ]) long <- data.frame("obs" = obs, "ts" = sort(rep(1:3, 20)), "time" = rep(1:20, 3)) m <- fit_dfa(y = long, data_shape = "long", iter = 50, chains = 1) # example of long format data with obs covariates s <- sim_dfa(num_trends = 1, num_years = 20, num_ts = 3) obs <- c(s$y_sim[1, ], s$y_sim[2, ], s$y_sim[3, ]) long <- data.frame("obs" = obs, "ts" = sort(rep(1:3, 20)), "time" = rep(1:20, 3)) obs_covar <- expand.grid("time" = 1:20, "timeseries" = 1:3, "covariate" = 1:2) obs_covar$value <- rnorm(nrow(obs_covar), 0, 0.1) m <- fit_dfa(y = long, data_shape = "long", iter = 50, chains = 1, obs_covar = obs_covar) # example of model with Z constrained to be proportions and wide format data s <- sim_dfa(num_trends = 1, num_years = 20, num_ts = 3) m <- fit_dfa(y = s$y_sim, z_model = "proportion", iter = 50, chains = 1) # example of model with Z constrained to be proportions and long format data s <- sim_dfa(num_trends = 1, num_years = 20, num_ts = 3) obs <- c(s$y_sim[1, ], s$y_sim[2, ], s$y_sim[3, ]) long <- data.frame("obs" = obs, "ts" = sort(rep(1:3, 20)), "time" = rep(1:20, 3)) m <- fit_dfa(y = long, data_shape = "long", z_model = "proportion", iter = 50, chains = 1) #' # example of B-spline model with wide format data s <- sim_dfa(num_trends = 1, num_years = 20, num_ts = 3) m <- fit_dfa(y = s$y_sim, iter = 50, chains = 1, trend_model = "bs", n_knots = 10) #' #' # example of P-spline model with wide format data s <- sim_dfa(num_trends = 1, num_years = 20, num_ts = 3) m <- fit_dfa(y = s$y_sim, iter = 50, chains = 1, trend_model = "ps", n_knots = 10) # example of Gaussian process model with wide format data s <- sim_dfa(num_trends = 1, num_years = 20, num_ts = 3) m <- fit_dfa(y = s$y_sim, iter = 50, chains = 1, trend_model = "gp", n_knots = 5) # example of long format data s <- sim_dfa(num_trends = 1, num_years = 20, num_ts = 3) obs <- c(s$y_sim[1, ], s$y_sim[2, ], s$y_sim[3, ]) long <- data.frame("obs" = obs, "ts" = sort(rep(1:3, 20)), "time" = rep(1:20, 3), "offset" = rep(0.1,length(obs))) m <- fit_dfa(y = long, data_shape = "long", offset = "offset", iter = 50, chains = 1) ## End(Not run)
Fit models with differing numbers of regimes to trend data
fit_regimes( y, sds = NULL, n_regimes = 2, iter = 2000, thin = 1, chains = 1, ... )fit_regimes( y, sds = NULL, n_regimes = 2, iter = 2000, thin = 1, chains = 1, ... )
y |
Data, time series or trend from fitted DFA model. |
sds |
Optional time series of standard deviations of estimates.
If passed in, residual variance not estimated. Defaults to |
n_regimes |
Number of regimes to evaluate, defaults 2 |
iter |
MCMC iterations, defaults to 2000. |
thin |
MCMC thinning rate, defaults to 1. |
chains |
MCMC chains, defaults to 1 (note that running multiple chains may result in a label switching problem where the regimes are identified with different IDs across chains). |
... |
Other parameters to pass to |
data(Nile) fit_regimes(log(Nile), iter = 50, n_regimes = 1)data(Nile) fit_regimes(log(Nile), iter = 50, n_regimes = 1)
Create initial values for the HMM model.
hmm_init(K, x_t)hmm_init(K, x_t)
K |
The number of regimes or clusters to fit. Called by |
x_t |
A matrix of values. Called by |
list of initial values (mu, sigma)
Invert chains
invert_chains(model, trends = 1, print = FALSE, ...)invert_chains(model, trends = 1, print = FALSE, ...)
model |
A Stan model, rstanfit object |
trends |
The number of trends in the DFA, defaults to 1 |
print |
Logical indicating whether the summary should be printed.
Defaults to |
... |
Other arguments to pass to |
find_inverted_chains
Pass in rstanfit model object, and a threshold Rhat value for
convergence. Returns boolean.
is_converged(fitted_model, threshold = 1.05, parameters = c("sigma", "x", "Z"))is_converged(fitted_model, threshold = 1.05, parameters = c("sigma", "x", "Z"))
fitted_model |
Samples extracted (with |
threshold |
Threshold for maximum Rhat. |
parameters |
Vector of parameters to be included in convergence determination. Defaults = c("sigma","x","Z"). Other elements can be added including "pred", "log_lik", or "lp__" |
Extract the LOOIC (leave-one-out information criterion) using
loo::loo(). Note that we've implemented slightly different variants
of loo, based on whether the DFA observation model includes correlation
between time series or not (default is no correlation). Importantly,
these different versions are not directly comparable to evaluate data support
for including correlation or not in a DFA. If time series are not correlated,
the point-wise log-likelihood for each observation is calculated and used
in the loo calculations. However if time series are correlated, then each
time slice is assumed to be a joint observation of
all variables, and the point-wise log-likelihood is calculated as the
joint likelihood of all variables under the multivariate normal distribution.
## S3 method for class 'bayesdfa' loo(x, ...)## S3 method for class 'bayesdfa' loo(x, ...)
x |
Output from |
... |
Arguments for |
set.seed(1) s <- sim_dfa(num_trends = 1, num_years = 20, num_ts = 3) m <- fit_dfa(y = s$y_sim, iter = 50, chains = 1, num_trends = 1) loo(m)set.seed(1) s <- sim_dfa(num_trends = 1, num_years = 20, num_ts = 3) m <- fit_dfa(y = s$y_sim, iter = 50, chains = 1, num_trends = 1) loo(m)
Plot the fitted values from a DFA
plot_fitted( modelfit, conf_level = 0.95, names = NULL, spaghetti = FALSE, time_labels = NULL )plot_fitted( modelfit, conf_level = 0.95, names = NULL, spaghetti = FALSE, time_labels = NULL )
modelfit |
Output from |
conf_level |
Probability level for CI. |
names |
Optional vector of names for plotting labels TODO. Should be same length as the number of time series |
spaghetti |
Defaults to FALSE, but if TRUE puts all raw time series (grey) and fitted values on a single plot |
time_labels |
Optional vector of time labels for plotting, same length as number of time steps |
plot_loadings fit_dfa rotate_trends dfa_fitted
y <- sim_dfa(num_trends = 2, num_years = 20, num_ts = 4) m <- fit_dfa(y = y$y_sim, num_trends = 2, iter = 50, chains = 1) p <- plot_fitted(m) print(p) p <- plot_fitted(m, spaghetti = TRUE) print(p)y <- sim_dfa(num_trends = 2, num_years = 20, num_ts = 4) m <- fit_dfa(y = y$y_sim, num_trends = 2, iter = 50, chains = 1) p <- plot_fitted(m) print(p) p <- plot_fitted(m, spaghetti = TRUE) print(p)
Plot the loadings from a DFA
plot_loadings( rotated_modelfit, names = NULL, facet = TRUE, violin = TRUE, conf_level = 0.95, threshold = NULL )plot_loadings( rotated_modelfit, names = NULL, facet = TRUE, violin = TRUE, conf_level = 0.95, threshold = NULL )
rotated_modelfit |
Output from |
names |
An optional vector of names for plotting the loadings. |
facet |
Logical. Should there be a separate facet for each trend?
Defaults to |
violin |
Logical. Should the full posterior densities be shown as a
violin plot? Defaults to |
conf_level |
Confidence level for credible intervals. Defaults to 0.95. |
threshold |
Numeric (0-1). Optional for plots, if included, only plot
loadings who have Pr(<0) or Pr(>0) > threshold. For example |
plot_trends fit_dfa rotate_trends
set.seed(42) s <- sim_dfa(num_trends = 2, num_ts = 4, num_years = 10) # only 1 chain and 180 iterations used so example runs quickly: m <- fit_dfa(y = s$y_sim, num_trends = 2, iter = 50, chains = 1) r <- rotate_trends(m) plot_loadings(r, violin = FALSE, facet = TRUE) plot_loadings(r, violin = FALSE, facet = FALSE) plot_loadings(r, violin = TRUE, facet = FALSE) plot_loadings(r, violin = TRUE, facet = TRUE)set.seed(42) s <- sim_dfa(num_trends = 2, num_ts = 4, num_years = 10) # only 1 chain and 180 iterations used so example runs quickly: m <- fit_dfa(y = s$y_sim, num_trends = 2, iter = 50, chains = 1) r <- rotate_trends(m) plot_loadings(r, violin = FALSE, facet = TRUE) plot_loadings(r, violin = FALSE, facet = FALSE) plot_loadings(r, violin = TRUE, facet = FALSE) plot_loadings(r, violin = TRUE, facet = TRUE)
find_regimes()
Plot the state probabilities from find_regimes()
plot_regime_model( model, probs = c(0.05, 0.95), type = c("probability", "means"), regime_prob_threshold = 0.9, plot_prob_indices = NULL, flip_regimes = FALSE )plot_regime_model( model, probs = c(0.05, 0.95), type = c("probability", "means"), regime_prob_threshold = 0.9, plot_prob_indices = NULL, flip_regimes = FALSE )
model |
A model returned by |
probs |
A numeric vector of quantiles to plot the credible intervals at.
Defaults to |
type |
Whether to plot the probabilities (default) or means. |
regime_prob_threshold |
The probability density that must be above 0.5.
Defaults to 0.9 before we classify a regime (only affects |
plot_prob_indices |
Optional indices of probability plots to plot. Defaults to showing all. |
flip_regimes |
Optional whether to flip regimes in plots, defaults to FALSE |
Note that the original timeseries data (dots) are shown scaled between 0 and 1.
data(Nile) m <- fit_regimes(log(Nile), n_regimes = 2, chains = 1, iter = 50) plot_regime_model(m) plot_regime_model(m, plot_prob_indices = c(2)) plot_regime_model(m, type = "means")data(Nile) m <- fit_regimes(log(Nile), n_regimes = 2, chains = 1, iter = 50) plot_regime_model(m) plot_regime_model(m, plot_prob_indices = c(2)) plot_regime_model(m, type = "means")
Plot the trends from a DFA
plot_trends( rotated_modelfit, years = NULL, highlight_outliers = FALSE, threshold = 0.01 )plot_trends( rotated_modelfit, years = NULL, highlight_outliers = FALSE, threshold = 0.01 )
rotated_modelfit |
Output from |
years |
Optional numeric vector of years for the plot |
highlight_outliers |
Logical. Should trend events
that exceed the probability of occurring with a normal distribution as
defined by |
threshold |
A probability threshold below which to flag trend events as extreme. Defaults to 0.01 |
dfa_trends plot_loadings fit_dfa rotate_trends
set.seed(1) s <- sim_dfa(num_trends = 1) m <- fit_dfa(y = s$y_sim, num_trends = 1, iter = 50, chains = 1) r <- rotate_trends(m) p <- plot_trends(r) print(p)set.seed(1) s <- sim_dfa(num_trends = 1) m <- fit_dfa(y = s$y_sim, num_trends = 1, iter = 50, chains = 1) r <- rotate_trends(m) p <- plot_trends(r) print(p)
Pass in rstanfit model object. Returns array of predictions, dimensioned
number of MCMC draws x number of MCMC chains x time series length x number of time series
predicted(fitted_model)predicted(fitted_model)
fitted_model |
Samples extracted (with |
## Not run: set.seed(42) s <- sim_dfa(num_trends = 1, num_years = 20, num_ts = 3) # only 1 chain and 1000 iterations used so example runs quickly: m <- fit_dfa(y = s$y_sim, iter = 2000, chains = 3, num_trends = 1) pred <- predicted(m) ## End(Not run)## Not run: set.seed(42) s <- sim_dfa(num_trends = 1, num_years = 20, num_ts = 3) # only 1 chain and 1000 iterations used so example runs quickly: m <- fit_dfa(y = s$y_sim, iter = 2000, chains = 3, num_trends = 1) pred <- predicted(m) ## End(Not run)
Rotate the trends from a DFA
rotate_trends(fitted_model, conf_level = 0.95, invert = FALSE)rotate_trends(fitted_model, conf_level = 0.95, invert = FALSE)
fitted_model |
Output from |
conf_level |
Probability level for CI. |
invert |
Whether to invert the trends and loadings for plotting purposes |
set.seed(42) s <- sim_dfa(num_trends = 1, num_years = 20, num_ts = 3) # only 1 chain and 800 iterations used so example runs quickly: m <- fit_dfa(y = s$y_sim, iter = 50, chains = 1) r <- rotate_trends(m) plot_trends(r)set.seed(42) s <- sim_dfa(num_trends = 1, num_years = 20, num_ts = 3) # only 1 chain and 800 iterations used so example runs quickly: m <- fit_dfa(y = s$y_sim, iter = 50, chains = 1) r <- rotate_trends(m) plot_trends(r)
Simulate from a DFA
sim_dfa( num_trends = 1, num_years = 20, num_ts = 4, loadings_matrix = matrix(nrow = num_ts, ncol = num_trends, rnorm(num_ts * num_trends, 0, 1)), sigma = rlnorm(1, meanlog = log(0.2), 0.1), varIndx = rep(1, num_ts), trend_model = c("rw", "bs"), spline_weights = matrix(ncol = 6, nrow = num_trends, data = rnorm(6 * num_trends)), extreme_value = NULL, extreme_loc = NULL, nu_fixed = 100, user_supplied_deviations = NULL )sim_dfa( num_trends = 1, num_years = 20, num_ts = 4, loadings_matrix = matrix(nrow = num_ts, ncol = num_trends, rnorm(num_ts * num_trends, 0, 1)), sigma = rlnorm(1, meanlog = log(0.2), 0.1), varIndx = rep(1, num_ts), trend_model = c("rw", "bs"), spline_weights = matrix(ncol = 6, nrow = num_trends, data = rnorm(6 * num_trends)), extreme_value = NULL, extreme_loc = NULL, nu_fixed = 100, user_supplied_deviations = NULL )
num_trends |
The number of trends. |
num_years |
The number of years. |
num_ts |
The number of timeseries. |
loadings_matrix |
A loadings matrix. The number of rows should match the
number of timeseries and the number of columns should match the number of
trends. Note that this loadings matrix will be internally manipulated by
setting some elements to 0 and constraining some elements to 1 so that the
model can be fitted. See |
sigma |
A vector of standard deviations on the observation error. Should
be of the same length as the number of trends. If not specified, random
numbers are used |
varIndx |
Indices of unique observation variances. Defaults to |
trend_model |
The type of trend model. Random walk ( |
spline_weights |
A matrix of basis function weights that is used
if |
extreme_value |
Value added to the random walk in the extreme time step. Defaults to not included. |
extreme_loc |
Location of single extreme event in the process. The same
for all processes, and defaults to |
nu_fixed |
Nu is the degrees of freedom parameter for the t-distribution, defaults to 100, which is effectively normal. |
user_supplied_deviations |
An optional matrix of deviations for the trend random walks. Columns are for trends and rows are for each time step. |
A list with the following elements: y_sim is the simulated data,
pred is the true underlying data without observation error added, x is
the underlying trends, Z is the manipulated loadings matrix that is fed
to the model.
x <- sim_dfa(num_trends = 2) names(x) matplot(t(x$y_sim), type = "l") matplot(t(x$x), type = "l") set.seed(42) x <- sim_dfa(extreme_value = -4, extreme_loc = 10) matplot(t(x$x), type = "l") abline(v = 10) matplot(t(x$pred), type = "l") abline(v = 10) set.seed(42) x <- sim_dfa() matplot(t(x$x), type = "l") abline(v = 10) matplot(t(x$pred), type = "l") abline(v = 10)x <- sim_dfa(num_trends = 2) names(x) matplot(t(x$y_sim), type = "l") matplot(t(x$x), type = "l") set.seed(42) x <- sim_dfa(extreme_value = -4, extreme_loc = 10) matplot(t(x$x), type = "l") abline(v = 10) matplot(t(x$pred), type = "l") abline(v = 10) set.seed(42) x <- sim_dfa() matplot(t(x$x), type = "l") abline(v = 10) matplot(t(x$pred), type = "l") abline(v = 10)
Fully incorporates the uncertainty from the posterior of the DFA trend
trend_cor( rotated_modelfit, y, trend = 1, time_window = seq_len(length(y)), trend_samples = 100, stan_iter = 300, stan_chains = 1, ... )trend_cor( rotated_modelfit, y, trend = 1, time_window = seq_len(length(y)), trend_samples = 100, stan_iter = 300, stan_chains = 1, ... )
rotated_modelfit |
Output from |
y |
A numeric vector to correlate with the DFA trend. Must be the same length as the DFA trend. |
trend |
A number corresponding to which trend to use, defaults to 1. |
time_window |
Indices indicating a time window slice to use in the correlation. Defaults to using the entire time window. Can be used to walk through the timeseries and test the cross correlations. |
trend_samples |
The number of samples from the trend posterior to use. A model will be run for each trend sample so this value shouldn't be too large. Defaults to 100. |
stan_iter |
The number of samples from the posterior with each Stan model run, defaults to 300. |
stan_chains |
The number of chains for each Stan model run, defaults to 1. |
... |
Other arguments to pass to |
Uses a sigma ~ half_t(3, 0, 2) prior on the residual standard
deviation and a uniform(-1, 1) prior on the correlation coefficient.
Fitted as a linear regression of y ~ x, where y represents the y
argument to trend_cor() and x represents the DFA trend, and both y
and x have been scaled by subtracting their means and dividing by their
standard deviations. Samples are drawn from the posterior of the trend and
repeatedly fed through the Stan regression to come up with a combined
posterior of the correlation.
A numeric vector of samples from the correlation coefficient posterior.
set.seed(1) s <- sim_dfa(num_trends = 1, num_years = 15) m <- fit_dfa(y = s$y_sim, num_trends = 1, iter = 50, chains = 1) r <- rotate_trends(m) n_years <- ncol(r$trends[, 1, ]) fake_dat <- rnorm(n_years, 0, 1) correlation <- trend_cor(r, fake_dat, trend_samples = 25) hist(correlation) correlation <- trend_cor(r, y = fake_dat, time_window = 5:15, trend_samples = 25 ) hist(correlation)set.seed(1) s <- sim_dfa(num_trends = 1, num_years = 15) m <- fit_dfa(y = s$y_sim, num_trends = 1, iter = 50, chains = 1) r <- rotate_trends(m) n_years <- ncol(r$trends[, 1, ]) fake_dat <- rnorm(n_years, 0, 1) correlation <- trend_cor(r, fake_dat, trend_samples = 25) hist(correlation) correlation <- trend_cor(r, y = fake_dat, time_window = 5:15, trend_samples = 25 ) hist(correlation)